Step 1:

Decide which areas of your deck need to be covered.

Step 2:

Cut the nylon film so as to cover the entire area you will need to draw.
If it’s not enough, join with masking tape and mark the joints (as shown in the image).

Step 3:

Stick the nylon film securely onto the deck area with adhesive paper tapes.
It is very important to not move it at all!

Step 4:

Use a thin marker to outline the surface.
Try to reach as smooth a surface as possible at the end for better adhesion.

Mark the direction of the pieces towards the bow with an arrow.

Number the pieces.

It is very important to know the direction and placement of the pieces on your boat!

Step 5:

Before removing the nylon, take several photos. They will help us better understand your boat!